Perfect Installation
in 5 Easy Steps
Getting a flawless, bubble-free application is easier than you think!
What You'll Need
Everything comes included with your Kavacham order
Your Kavacham skin
Included installation kit
Hair dryer (optional, for curved edges)
Well-lit, dust-free environment
Installation Guide
Follow our proven method for professional results
Prepare Your Device
Clean and prepare your device for the perfect application
- Power off your device
- Remove any existing skins or cases
- Clean thoroughly with included alcohol wipe
- Wipe with microfiber cloth until spotless
- Use dust removal stickers for any particles
Align Before Applying
Practice makes perfect - get the alignment right first
- Don't remove backing yet!
- Place skin on device to check alignment
- Note the key alignment points (camera, buttons, ports)
- Practice the placement motion
- Visualize where you'll start application
Apply the Skin
The moment of truth - slow and steady wins
- Peel back only 1-2 inches of backing from top edge
- Align perfectly with top of device
- Press down the exposed edge firmly
- Slowly peel backing while smoothing downward
- Use included squeegee to push out air bubbles
Perfect the Edges
Secure every corner for long-lasting protection
- Work from center outward to edges
- For curved edges, apply gentle heat with hair dryer
- Press and hold each edge for 10 seconds
- Pay special attention to corners
- Ensure complete adhesion around ports
Final Touches
Complete the installation and enjoy your protected device
- Run squeegee over entire surface
- Check all edges are fully adhered
- Remove any remaining tiny bubbles (they'll disappear in 24-48 hours)
- Power on device and test all buttons
- Enjoy your perfectly protected device!
Pro Tips
Temperature matters
Room temperature (70-75°F) is ideal
Take your time
Rushing leads to mistakes
Start over if needed
The skin can be repositioned within first few minutes
Bubble-free guarantee
Our air-channel adhesive eliminates most bubbles automatically
Common Mistakes to Avoid
Need More Help?
Video Tutorial
Scan the QR code on your installation kit for our step-by-step video guide
Get Support
Email us photos if you need help - we'll guide you through or send a replacement
Contact Support